Common Codes and Solutions for Lexmark Printers

1.Prompt Code: [42.XXX]

Cause

Region Mismatch: The printer cannot recognize the chip because the chip’s region and the printer’s region do not match, resulting in error code [42.XXX].

Figure 1: Code [42.XXX]

Solution

Step 1: On the Settings page tap [Troubleshooting], then tap [Print Quality Test Pages].

Figure 2: Settings Page

Step 2: Under [Cartridge Information], locate [Printer Region] to check the printer’s region code.

Figure 3: Quality Test Page

The following table lists the regions and their corresponding codes. Refer to the table to replace the chip with the correct regional version.

2.Code: [32.40X]

Cause

The prompt “Replace Unsupported Cartridge [32.40X]” is usually caused by:

·Incorrect Cartridge Model

The installed cartridge is from a different series, or a high-yield cartridge has been installed that is not supported by the current printer model.

·Poor Chip Contact

Dust, oxidation, deformation, or misalignment of the chip or the printer’s internal contacts have caused a communication failure.

·Cartridge Disabled [32.40E]

The OEM cartridge has been flagged by the system as invalid, expired, or unauthorized.

·Improper Installation [32.40Z]

The cartridge is not fully seated, the front cover is not securely closed, or the cover sensor is malfunctioning.

Figure 4: Code [32.40X]

Solution

Step 1: Ensure the cartridge model matches the printer, including both the model number and yield.

Step 2: Check and clean the chip and the printer’s internal contacts. Ensure there is no dirt, oxidation, or deformation. Reinstall the cartridge securely and ensure the front cover is properly closed.

Step3: If the [32.40E] error persists or the problem continues, the cartridge may need to be replaced with a new OEM one.

3. Code: [31.40X]

Cause

The prompt “Re-install missing or unresponsive cartridge [31.40X]” is usually caused by a missing or unresponsive cartridge. This may result from poor contact due to damage to the cartridge components or the chip.

Figure 5: Code [31.40C]

Solution

Test the chip by installing it on an OEM cartridge.

·If the chip is recognized on the OEM cartridge:

The issue may be caused by a physical compatibility problem with the cartridge. Inspect the cartridge shell for defects or replace the unit.

·If the chip is not recognized on the OEM cartridge:

The chip itself is likely damaged and should be replaced.

4. Code: [88.XXX]

Cause

The prompt “Replace black cartridge, 0 pages remain. [88.XXX]” is usually caused by:

·Chip End-of-Life

The prompt appears when the chip has reached the end of its service life and needs to be replaced.

·Continuous Toner Shortage

The prompt may also appear when the printer detects a persistent toner shortage. This can be caused by poor toner flow, a clogged toner delivery path, or an empty cartridge.

Figure 6: Code [88.40K]

Solution

Step 1: Remove the cartridge, gently shake it several times, then reinstall it and restart the printer.

Step 2: Check whether there is sufficient toner remaining in the cartridge.

Step 3: If there is sufficient toner present but the code persists, inspect and clean the toner delivery path to ensure there are no toner clumps or blockages.

After completing the above steps, replace the cartridge chip with a new one.

Summary

When troubleshooting, use the full prompt to identify the root cause and apply the corresponding solution.

All images in this article are for reference only; actual products may vary. All brand names and trademarks not owned by our company are the property of their respective owners and are used for reference purposes only.

Please follow Zhono and subscribe on LinkedIn or Facebook. For more information, please contact your sales representative or send an email to info@zhono.com.