Lexmark Optra e230 250 350 OPC Drum Rebuilding Instructions



How to remanufacture and reset instructions for Lexmark OPC Photoconductor Drum Unit Optra e230 e332 e238 e240 e250 e330 e332 e340 e342 e350 e450 12A8302 – Dell laser Printer 1700/1710 OPC Cartridge 310-7042 310-5404 – IBM InfoPrint 1412 1512 OPC Cartridge 75P5712 – Toshiba E-Studio 270P 300P OPC Cartridge 12A8570
Drum for Optra e230/330 series and for Optra e250/350/450 series are different and not interchangeable but the remanufacturing instructions are the same.

THINGS REQUIRED
- New drum
- Screwdriver
- Needle nose pliers

For any question or suggestion leave a comment

Resetting Lexmark Optra e340/342 printers with display:
- Turn the printer off
- Press and hold “SELECT” and “RETURN” buttons.
- Turn the printer on, keeping both buttons pressed.
- CONFIG MENU or PERFORMING SELF TEST will appears on the display.
- Release the 2 buttons.
- RESET PC CNT will appear on the display. If not, press the “LEFT” or “RIGHT” menu buttons until it appear.
- Press “SELECT” button. RESETTING PC CNT VALUE appear on the display.
- When the display shows CONFIG MENU again, turn the printer off.
- Turn the printer on. The counter is reset.

Resetting Lexmark Optra e230/232/234/238/240/330/332 printers without display:
- With the printer on and the READY light on, open the front cover.
- Press and hold “CANCEL” button until all leds begin flashing.
- Release “CANCEL” button and close the cover. The drum unit now is reset.

Resetting Lexmark Optra e350/352/450 printers with display:
- Turn off the printer.
- Press and hold “SELECT” and “BACK” buttons, then turn the printer on.
- Press “right arrow” until “RESET PC CNT” appears on the display.
- Press “SELECT” button. “=RESET” will appear on the display.
- Press “SELECT” button. “RESETTING PC CNT VALUE” appears on the display.
- Turn the machine off, then turn the machine on. The counter now is reset.

Resetting Lexmark Optra e350/352/450 printers without display:
- Turn off the printer and open the front cover.
- Press and hold “Continue” button (Diamond shape symbol) and turn the machine on.
- Hold “Continue” button down until the last led (error led) is on solid.
- Release the button and close the front cover. All the top 3 led should be on solid.
- Slowly press “cancel” button (triangle symbol) 4 times, until you see the toner low light (2nd light from top) on solid.
- Press “continue” button and wait until you see the light sequence.
- Press “cancel” button and wait until you see the light sequence.
- Turn off the printer, then turn on to exit the configuration mode. The PC count is reset.

Repetitive Defects:
Charge roller (drum unit) 38.2mm
Drum (drum unit) 96.7mm
Developer roller (toner cartridge) 47.8mm
Transfer roller (printer) 51.7mm
Upper fuser sleeve (printer) 79.8mm
Lower fuser roller (printer) 95.5mm

——————————————–
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)

http://www.linkaccessori.it

email: link.accessori@libero.it

other links:

http://www.emmegiricambi.it/

http://www.lexmark.com/en_us.html

————————————————————————-


Post time: Mar-03-2018

INQUIRY DETAILS *

INQUIRY NOW
  • captcha