Easy way to replace the chip after refill for Magicolor 1690mf, 1695mf Oki C110, Oki c130n

Post by http://www.tm-toner.com
1.Unscrew the chip halfway through, just enough to loosen the chip.
2.Remove the chip by prying off on one side.
3.Install the chip by sliding it on one end first then pop it into place.Please note that the chip placement should be that the two holes or arrows on the chip are facing the roller as shown on the video.
4 Re-screw the chip into place.

Post time: Sep-15-2018
  • * CAPTCHA: Please select the Car