Remanufacturing instructions for Brother toner cartridge HL-5440D HL-5450 HL-5470 HL-6180 DCP-8110DN DCP-8150DN DCP-8155DN DCP-8250DN MFC-8510DN MFC-8520DN MFC-8710DW MFC-8810DW MFC-8910DW MFC-8950 TN720 TN750 TN780 TN3330 TN3380 TN3390 TN3320 TN3350 TN3370 TN3310 TN3340 TN3360
- ACTIVATE SUBTITLES IN YOUR LANGUAGE -
There are three different toner cartridges available for these machines. Standard cartridge is rated for 3000 pages, the high yield is rated for 8000 pages and the Super High yield is rated for 12000 pages. The Super High Yield will only fit into HL-6180 and MFC-8950 machines.
There are different part numbers for these cartridges depending on your region.
High Yield TN750
Super High Yield TN780
High Yield TN3380
Super High Yield TN3390
High Yield TN3350
Super High Yield TN3370
High Yield TN3340
Super High Yield TN3360
Toner for use in Brother HL-5140 series of cartridges
Better if you have compressed air
The super high yield cartridges are slightly larger than the standard or high yield cartridges
When you install a new toner cartridge the bias voltage is set to high voltage and the cartridge page count is reset to zero.
As the cartridge is used, the bias voltage is reduced gradually down.
This is because a new toner cartridge has the tendency to print light.
The density increases as the cartridge is used.
To keep the density level even throughout the life of the cartridge, the density bias voltage is reduced accordingly.
different yields means different decreases in density over time, so Brother uses different reset gears to tell the printer how fast to reduce the bias voltage.
Printing a test page:
1. Press any of the arrows, then “OK” or “Back”.
2. Press “UP” or “DOWN” arrows until you see on the display “Machine Info”
3. Press “OK” or “GO”
4. Press arrows until you see “Demo Print” or “Test Page”
5. Press “OK” or “GO”
For any question or suggestion leave a comment
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
Post time: Jun-20-2017