Please Subscribe, Like, Comment, Share It.
This method is proven to work on all your HP Cartridge and the easiest way to refill without a big mess. Taking apart like other YouTubers are not the proper way to do it and it might or will mess up other moving parts inside cartridges!
Making a hole on your cartridge with a hole drill bit or soldering ion. Make sure to tape the hold back up with supply aluminum tape. Make sure you press the tap down firmly so toner dust will not sip through. Shake it well and look around the tape makes sure it doesn’t leak out or it will make a big mess inside your LaserJet.
“WARNING* “DO IT AT YOUR OWN RISK!”
“MUST PURCHASE REFILL – MADE IN USA! OR YOU ARE JUST WASTING YOUR TIME DOINT IT!”
“SHAKE YOUR TONER WELL!”
“DO NOT BREATH IN REFILL AIR DUST! WEAR A MASK!”
“NOT LIABLE FOR ANY DAMAGES ON YOUR PRINTERS OR CATRIDGES!!!”
“MUST TESTED FOR LEAKS BEFORE PUTTING BACK ON YOUR PRINTER, SHAKE YOUR TONER!!!”
“PLEASE WATCH THIS FULL VIDEO BEFORE TESTING/INSTALLING IN YOUR PRINTERS!”
THANK YOU FOR WATCHING! SUBSCRIBE, LIKE, COMMENT, SHARE, SO WE CAN MAKE MORE VIDEOS!
Post time: Oct-18-2017